Prepare the nail and workspace
Read the gel and lamp instructions before starting. Set out the polish, the included magnetic stick, a compatible UV/LED lamp, and any manicure supplies you normally use. Work on a clean, stable surface with good ventilation and protect the table from spills. Avoid skin contact with uncured gel; follow the product label if gel touches the skin, and do not continue if irritation occurs.
Prepare the nail surface using a method suitable for your manicure system, then apply only the base layers recommended for that system. Keep the magnet clean and away from small metal objects that could interfere with handling. The Biutee Cat Eyes Magnetic Gel – Holographic Soak Off Nail Polish UV/LED with Magnetic Stick for Salon">BIUTEE Cat Eyes Magnetic Gel set listing describes two 8 ml gels and a magnetic stick; check the current listing for exact contents and compatible curing directions.
Apply a thin, even color layer
Apply a controlled layer of magnetic gel and keep it within the nail edges. A thin, even coat is easier to manipulate than a thick puddle and reduces the chance of gel touching the skin. Before using the magnet, read whether the product calls for a particular base color or layer sequence. The appearance can vary with the shade, coat thickness, and the magnet’s distance.
Practice on one nail or a nail tip before completing the full manicure. If the polish floods the cuticle or sidewall, clean it before curing according to the product’s safety directions. Do not cure gel that has touched skin, since curing can make removal more difficult and may increase the risk of irritation or allergy. Use only the lamp and cure time specified for the product.
Test magnet distance and angle
Hold the magnetic stick above the uncured gel without touching the nail. Move it slowly and observe how the reflective particles shift. A closer magnet may create a sharper band, while a different angle can move the highlight across the nail; exact results depend on the magnet and formula. Keep the stick steady for the duration recommended by the product instructions, then remove it carefully.
Use a test tip to compare a centered stripe, a diagonal highlight, or a curved cat-eye effect before choosing a design. Keep the magnet at a consistent height across nails so the look is easier to repeat. If the particles move too much or the gel begins to level differently, pause and follow the product’s recommended timing rather than repeatedly waving the magnet.
Work one nail at a time for consistency
Magnetic particles can settle as you move between fingers, so shape and cure one nail at a time if the product directions recommend it. Apply the gel, create the chosen effect, and cure as directed before moving on. This reduces accidental smudges and helps the highlight stay where you placed it. Keep the same magnet angle and approximate distance for a coordinated set.
If the highlight disappears before curing, check whether the layer was too thick, whether too much time passed, or whether the magnet moved. Change one factor at a time on a test tip. Avoid touching the wet surface to reposition particles. Do not add extra layers until you understand how the formula is meant to be built and cured.
Finish without dragging the design
After the magnetic layer has cured according to instructions, apply a compatible top coat if the manicure system calls for one. Use a light, controlled stroke so the brush does not drag through the design. Seal the free edge only when that step is part of the product directions. Cure the top coat with the specified lamp and timing, and let the nail cool before evaluating its final shine.
If the effect looks cloudy or uneven, avoid adding repeated thick coats to hide it. Check that the layer was even, the magnet was positioned consistently, and the lamp cured the product as directed. Some formulas have a tacky layer or require a particular finishing step; follow the label rather than assuming all gel polish systems behave the same way.
Clean tools and remove gel safely
Wipe the magnet and tools using a method compatible with their materials and the polish system. Keep uncured gel off the skin and dispose of wipes and residue according to the product label. Store the magnetic stick and bottles in a clean, dry place, away from heat and direct sunlight when the directions require it. Keep manicure products out of reach of children and pets.
When removing the manicure, use the exact removal method stated for the gel. Do not peel or force cured product from the nail, and stop if the natural nail becomes painful or damaged. If you develop redness, itching, swelling, or another reaction, discontinue use and seek professional advice. Careful application and removal are part of a safer nail-art routine.
