Milky white jelly gel is intentionally translucent, so brush marks and uneven thickness can show through more than they do in an opaque color. An even result comes from careful preparation, a controlled amount on the brush, thin layers, and the exact curing system specified for the product.
Confirm the complete compatible system
Read the gel, base, top coat, and lamp instructions together. Confirm lamp wavelength, power, cure time, layer guidance, removal method, and any professional-use restrictions. Do not combine products merely because they are all described as gel.
Check nails and surrounding skin
Do not apply over broken skin, inflamed tissue, infection, damaged nails, or a suspected allergy. Avoid aggressive cuticle cutting and over-filing. Abnormal nail or skin conditions need qualified assessment before cosmetic application.
Prepare without touching living skin
Shape and prepare only as directed, remove dust safely, and keep the nail plate free from oil or lint. Use ventilation and required protective equipment. Prevent uncured gel from contacting skin throughout the service.
Review the exact jelly gel
The BIUTEE 15ml milky white jelly UV gel polish is intended for a translucent milky look. Verify the actual package directions, ingredients, compatible base and top, lamp, curing schedule, warnings, storage, and removal before application.
Load less product on the brush
Wipe excess from one side of the brush neck and begin with a small bead. A flooded brush deposits a thick center and uneven edges. Keep the bottle away from lamp light and close it when not in active use.
Float a thin coat with light pressure
Place the brush short of the cuticle, guide product toward the margin without touching skin, then pull smoothly toward the free edge. Heavy pressure separates the bristles and creates tracks; too little control leaves pools.
Keep the first layer sheer
The first coat should establish an even veil rather than full opacity. Check the sidewalls and free edge for pooling. Remove accidental skin contact completely by the approved method before curing—never cure gel on skin.
Cure each layer exactly as specified
Position the hand or practice tip correctly in the compatible lamp and use the stated time. Do not shorten curing because a layer looks dry. If the product wrinkles, remains soft, or may be under-cured, follow the manufacturer’s correction or removal instructions.
Build opacity with another thin layer
Apply a second controlled coat only after the prior layer is correctly cured. Look from above and both sides. Add an additional layer only if the product instructions permit it; thick layers are not a safe shortcut to opacity.
Finish, inspect, and remove safely
Use a compatible top coat and cure as directed. Confirm there is no uncured product, skin contact, lifting, or wrinkling. Follow the approved soak-off or file-off process and never peel the coating, which can damage the natural nail.
